Custom Building Products
Custom Building Products Caulk
| Product | Image | Description | Size |
| Commercial 100% Silicone Sealant | 100% Silicone Sealant is permanently flexible and is designed for use in coves, corners, changes in plane and expansion joints associated with exterior or interiors applications of tile and stone | 10.1 oz | |
| Ceramic Tile Caulk | ![]() |
Ceramic tile caulk is for caulking around sinks, tubs, showers and where tile meets tile or another surface. Also adheres bath fixtures and loose tile | 10.1 oz |
Custom Building Products Grout
| Product | Image | Description | Size |
| Prism Ultimate | ![]() |
Prism’s calcium Aluminate cement based, latex polymer-modified formula offers consistent color with no shading regardless of tile type, temperature or humidity, and it will not effloresce | 17 lb |
| Prism SCG | ![]() |
Prism Single-Component Grout (SCG) is a professional grade premixed, efflorescence-free, and crack-resistant sanded grout | 1 gallon |
| Polyblend Plus Sanded | ![]() |
Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency | 7 lb, 25 lb |
| Polyblend Plus Non-Sanded | ![]() |
Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency | 10 lb |
| Polyblend HP | ![]() |
Polyblend HP High Performance Fine Aggregate Grout is a new high performance cement grout that has the added benefit of fine aggregate sand that allows for use in the smallest of grout joints | 25 lb |
Custom Building Products Adhesives
| Product | Image | Description | Size |
![]() |
AcrylPro is a professional grade tile and stone adhesive. Engineered for the intermittent water exposure seen in tub surrounds and shower walls | 1 quart, 1 gallon | |
| OmniGrip | ![]() |
OmniGrip is a flexible, lightweight tile and stone adhesive with 33% less shrinkage than traditional adhesives. Engineered for intermittent water exposure | 1 gallon, 3.5 gallon |
![]() |
Reliabond is a professional grade tile and stone adhesive. Engineered for the intermittent water exposure seen in tub surrounds and shower walls | 3.5 gallon | |
| T1-60 | ![]() |
T1-60 is a ceramic tile adhesive suitable for most wall, floor and countertop installations | 3.5 gallon |
| Thin-Set & Mortar Admix | ![]() |
Thin-Set & Mortar Admix is a liquid polymer admix used in place of water to increase performance of cement mortar beds, non-modified thin-set mortars and cement-based grouts | 2.5 gallon |
| Wall base adhesive | ![]() |
Wall Base Adhesive is an impact-resistant, non-staining vinyl, rubber and carpet wall base adhesive with exceptional tack and early strength | 30 oz, 4 gallon |
| Carpet Tile PSA | ![]() |
Carpet Tile PSA pressure sensitive adhesive is a quick flash, high tack solution for carpet tile | 4 gallon |
Custom Building Products Mortars
| Product | Image | Description | Size |
![]() |
VersaBond is a high bond strength, all-purpose, polymer-modified mortar adheres to most surfaces. For interior and exterior floors and walls | 25 lb, 50 lb | |
| VersaBond HP | ![]() |
VersaBond HP is a commercial-grade, high-performance, polymer-modified mortar designed for large and heavy tile applications | 50 lb |
| VersaBond LFT | ![]() |
VersaBond LFT is one of the industry’s most popular mortars. This non-sag, non-slump medium bed mortar is designed for most large format porcelain, ceramic and natural stone tile | 50 lb |
| VersaBond LFT RS | ![]() |
Versabond LFT RS professional grade adhesive mortar is a rapid setting, non-sag, nonslump, polymer modified mortar for use with large format porcelain, ceramic and natural stone tile | 50 lb |
| VersaBond Lite | ![]() |
VersaBond Lite offers all the performance of Versabond®-LFT with maximized creaminess and the benefits of a true lightweight mortar | 35 lb |
| SpeedSet | ![]() |
SpeedSet is a fast setting, polymer modified mortar ideal for fast track or cold weather jobs | 25 lb |
| ProLite | ![]() |
ProLite is an exceptional handling mortar is ideal for setting large and heavy tile on interior or exterior floors and walls | 30 lb |
| ProLite RS | ![]() |
ProLite RS is a rapid setting version of ProLite. Grout in under 3 hours with light traffic in 4 hours | 30 lb |
| CustomBlend LHT | ![]() |
CustomBlend LHT Large and Heavy Tile Mortar offers a non-sag and non-slump solution for most interior and exterior, wall and floor applications | 44 lb |
| CustomBlend | ![]() |
CustomBlend is a non-modified mortar ideal for Saltillo tile and other similar clay pavers | 50 lb |
Custom Building Products Patching Compounds
| Product | Image | Description | Size |
| Silk Patching & Finishing Compound | ![]() |
Silk Patching & Finishing Compound is a fast-curing, premium patching and finishing compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. | 10 lb |
| TechPatch SC | ![]() |
TechPatch SC is a fast-curing, cement-based, skim coat and patching compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings | 10 lb |
| TechPatch RP | ![]() |
TechPatch RP is a premium quality calcium aluminate, fast setting underlayment product with exceptional handling characteristics, used for ramping, patching or screeding suitable horizontal substrates. | 40 lb |
| TechPatch MP | ![]() |
TechPatch MP is a fast-setting, calcium aluminate compound that provides a smooth finish on interior subfloors prior to the installation of a wide variety of floor coverings. | 25 lb |
Custom Building Products Primers
| Product | Image | Description | Size |
| TechPrime A | ![]() |
TechPrime A is an advanced acrylic primer and sealer that prepares surfaces for the application of an appropriate CustomTec self-leveling underlayment | 1 gallon, 3.5 gallon |
| TechPrime E | ![]() |
TechPrime E is a low-viscosity, two-component, 100%-solids epoxy primer for surface preparation before installing an appropriate CustomTec underlayment | 2.7gal Low-viscosity, two-component |
![]() |
LevelQuik Primer is for use as a primer in the application of LevelQuik or LevelLite Self-Leveling Underlayments | 1 quart, 1 gallon |
Custom Building Products Self-Leveling Underlayments
| Product | Image | Description | Size |
| TechLevel 100 | ![]() |
TechLevel 100 is a high quality self-leveling underlayment that achieves greater than 4000 psi compressive strength | 50 lb |
| TechLevel 150 | ![]() |
TechLevel 150 is a premium, calcium aluminate based, high quality self-leveling underlayment that achieves greater than 4300 psi compressive. | 50 lb |
| LevelQuik RS | ![]() |
LevelQuik RS is a premium, quick setting, and high flow calcium aluminate based self-leveling underlayment that easily levels floors prior to the installation of ceramic tile, natural stone tile, resilient flooring, carpet, wood, and other floor coverings | 50 lb |
![]() |
LevelQuik ES is a premium, calcium aluminate based, high quality self-leveling underlayment that levels floors prior to the installation of ceramic tile, natural stone tile, resilient flooring, carpet, wood, and other floor coverings | 50 lb | |
![]() |
LevelQuik Advance is a high-flow, fiber-reinforced self-leveling underlayment that offers the unique advantage of being a versatile solution perfect for all construction and renovation projects | 50 lb | |
![]() |
LevelLite is 40% lighter than other self-leveling underlayments, making it easy to handle, pour, and carry. It helps level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood, and other floor coverings. | 30 lb |
Custom Building Products Waterproofing Membranes & Underlayments
| Product | Image | Description | Size |
![]() |
Waterproofing and Anti-Fracture Reinforcing Fabric is an alkali-resistant fiberglass fabric used to reinforce RedGard®, Custom® 9240, FractureFree®, CBP-232, and RedGard® SpeedCoat® when used over cracks in underlayment | 6″x75′ roll | |
| CBP-232 Waterproof & Anti-Fracture Membrane | ![]() |
CBP-232 is a ready-to-use, rapid drying, liquid applied elastomeric, waterproofing, and crack prevention membrane that does not require fabric in the field, coves, or corners | 1 gallon, 5 gallon |
| RedGard Waterproofing and Crack Prevention Membrane | ![]() |
RedGard Waterproofing and Crack Prevention Membrane creates a waterproof membrane barrier and reduces crack transmission for use on both interior and exterior substrates | 1 gallon, 3.5 gallon |
![]() |
RedGard Uncoupling Mat is both a waterproof and vaporproof uncoupling membrane that can be used for crack-isolation in most tile, porcelain, or natural stone installations |
54 sqft, 323 sqft | |
| Custom 9240 Waterproofing and Anti-Fracture Membrane | ![]() |
Custom 9240 is designed for waterproofing tile and stone installations that securely bonds to a variety of substrates | Coverage is for a full Custom 9240 kit |
| RedGard Seam Tape | ![]() |
RedGard Seam Tape is a fast and easy way to cover seams and changes of plane when installing RedGard Uncoupling Mat and Fabric Membrane to provide waterproofing and vapor barrier protection | 4.7″ x 16.25′, 6″ x 98.5′ |
| Waterproofing Reinforcing Tape | ![]() |
An alkali resistant fiberglass tape used to reinforce RedGard Liquid Waterproofing and Crack Prevention Membrane and RedGard SpeedCoat Waterproofing Membrane around drains in shower pans, corners, etc | 2″ x 50′ roll |
| Waterproofing and Anti-Fracture Membrane Mesh | ![]() |
An alkali-resistant fiberglass tape used to reinforce RedGard and RedGard SpeedCoat when used over cracks in underlayment | 6″ x 150′ roll |
| RedGard Fabric Membrane | ![]() |
Waterproof fabric sheet and vapor-retarder designed for use in both horizontal and vertical tiling applications such as showers, residential steam showers, and other high demand wet environments | 323 sqft |
| RedGard Fabric Membrane Mixer and Pipe Seal | ![]() |
RedGard Fabric Membrane Mixer and Pipe Seal is a fast and easy way to prepare and waterproof shower walls with piping and handles for tile installation | 10″ x 10″ w/ 1/2″ opening |














































